|
Плотность тока в системе [[СИ]] измеряется в амперах на [[квадратный метр]].
=== Мощностьსიმძლავრე ===
{{მთავარი|ჯოულის კანონი}}
{{main|Закон Джоуля — Ленца}}
При наличии тока в проводнике совершается [[работа]] против сил сопротивления. Эта работа выделяется в виде [[Тепло|тепла]]. [[Мощность]]ю тепловых потерь называется величина, равная [[Количество теплоты|количеству выделившегося тепла]] в единицу времени. Согласно закону Джоуля — Ленца мощность тепловых потерь в проводнике пропорциональна силе протекающего тока и приложенному напряжению:
: <math>P = IU = I^2R = \frac{U^2}{R}</math>
სიმძლავრის ერთეული [[SI სისტემა]]ში არის [[ვატი]].
Мощность измеряется в [[ватт]]ах
В [[Сплошная среда|сплошной среде]] [[объёмная мощность]] потерь <math>p</math> определяется [[Скалярное произведение|скалярным произведением]] вектора плотности тока <math>\vec{j}</math> и вектора [[Напряжённость электрического поля|напряжённости электрического поля]] <math>\vec{E}</math> в данной точке:
: <math>p = \left(\vec{j}\vec{E}\right) = \sigma E^2 = \frac{j^2}{\sigma}</math>
მოცულობითი სიმძლავრე იზომება [[ვატი|ვატებში]] კუბურ [[მეტრი|მეტრზე]] ერთეულებში.
Объёмная мощность измеряется в ваттах на [[кубический метр]].
The [[International System of Units|SI]] unit for measuring the rate of flow of electric charge is the [[ampere]]. Electric current
is measured using an [[ammeter]].<ref name="learn-physics-today" />
==Physics==
===Electric current through various media===
==== Metals ====
A [[solid]] [[Electrical conductor|conductive]] metal contains mobile, or [[free electron|free, electrons]], originating in the [[conduction electrons]]. These electrons are bound to the [[Metal#Definition|metal lattice]] but no longer to any individual atom. Even with no external [[electric field]] applied, these electrons move about randomly due to [[thermal energy]] but, on average, there is zero net current within the metal. Given a plane through which the wire passes, the number of [[electron]]s moving from one side to the other in any period of time is on average equal to the number passing in the opposite direction. As [[George Gamow]] put in his science-popularizing book, ''One, Two, Three...Infinity'' (1947), "The metallic substances differ from all other materials by the fact that the outer shells of their atoms are bound rather loosely, and often let one of their electrons go free. Thus the interior of a metal is filled up with a large number of unattached electrons that travel aimlessly around like a crowd of displaced persons. When a metal wire is subjected to electric force applied on its opposite ends, these free electrons rush in the direction of the force, thus forming what we call an electric current."
[[Image:Stranded lamp wire.jpg|thumb|A typical wire for electrical conduction is the stranded [[copper]] [[wire]].]]
When a metal wire is connected across the two terminals of a [[Direct current|DC]] [[voltage source]] such as a [[battery (electricity)|battery]], the source places an electric field across the conductor. The moment contact is made, the [[free electron]]s of the conductor are forced to drift toward the [[positive]] terminal under the influence of this field. The free electrons are therefore the [[current carrier]] in a typical solid conductor. For an electric current of 1 ampere, 1 [[coulomb]] of [[electric charge]] (which consists of about 6.242 × 10<sup>18</sup> [[elementary charge]]s) drifts every [[second]] through any plane through which the conductor passes.
For a steady flow, the current ''I'' in [[ampere]]s can be calculated with the following equation:
:<math>I = {Q \over t} \, ,</math>
where ''Q'' is the [[electric charge]] in [[coulomb]]s transferred, and ''t'' is the [[time]] in [[second]]s
More generally, electric current can be represented as the time rate of change of charge, or
:<math>I = \frac{dQ}{dt} \, .</math>
==== Other media====
In metallic solids, electricity flows by means of electrons, from higher to lower [[electrical potential]]. In other media, any stream of charged objects may constitute an electric current. So when there is higher cross sectional area there is less resistance. Conventional currents flows in the opposite way of electron current. In terms of Ohm's law current is proportional to voltage and inversely proportional to the resistance.
In a [[vacuum]], a beam of [[ion]]s or electrons may be formed. In other conductive materials, the electric current is due to the flow of both positively and negatively charged particles at the same time. In still others, the current is entirely due to [[proton conductor|positive charge flow]]. For example, the electric currents in [[electrolytes]] are flows of electrically charged atoms ([[ion]]s), which exist in both positive and negative varieties. In a common lead-acid [[electrochemistry|electrochemical]] cell, electric currents are composed of positive hydrogen ions (protons) flowing in one direction, and negative sulfate ions flowing in the other. Electric currents in sparks or [[Plasma physics|plasma]] are flows of electrons as well as positive and negative ions. In ice and in certain solid electrolytes, the electric current is entirely composed of flowing [[ion]]s. In a [[semiconductor]] it is sometimes useful to think of the current as due to the flow of positive "[[electron hole|holes]]" (the mobile positive charge carriers that are places where the semiconductor crystal is missing a valence electron). This is the case in a p-type [[semiconductor]].
=== Current density ===
{{main|Current density}}
Current density is a measure of the density of an electric current. It is defined as a [[Vector (geometric)|vector]] whose magnitude is the electric current per cross-sectional area. In [[SI|SI units]], the current density is measured in [[ampere]]s per [[square meter]].
:<math>I = \mathbf{J} \cdot \mathbf{A}</math>
where ''I'' is current in the conductor, '''J''' is the current density, and '''A''' is the cross-sectional area.
The dot product of two vector quantity signifies that electric current is a scalar.
=== Drift speed ===
The mobile charged particles within a conductor move constantly in random directions, like the particles of a [[gas]]. In order for there to be a net flow of charge, the particles must also move together with an average drift rate. Electrons are the charge carriers in [[metal]]s and they follow an erratic path, bouncing from atom to atom, but generally drifting in the direction of the [[electric field]]. The speed at which they drift can be calculated from the equation:
:<math>I=nAvQ \, ,</math>
where
:<math>I</math> is the electric current
:<math>n</math> is number of charged particles per unit volume (or charge carrier density)
:<math>A</math> is the cross-sectional area of the conductor
:<math>v</math> is the [[drift velocity]], and
:<math>Q</math> is the charge on each particle.
Electric currents in solids typically flow very slowly. For example, in a [[copper]] [[wire]] of cross-section 0.5 mm<sup>2</sup>, carrying a current of 5 A, the ''[[drift velocity]]'' of the electrons is of the order of a millimetre per second. To take a different example, in the near-vacuum inside a [[cathode ray tube]], the electrons travel in near-straight lines at about a tenth of the [[speed of light]].
Any accelerating electric charge, and therefore any changing electric current, gives rise to an [[Electromagnetism|electromagnetic]] wave that propagates at very high speed outside the surface of the conductor. This speed is usually a significant fraction of the speed of light, as can be deduced from [[Maxwell's Equations]], and is therefore many times faster than the drift velocity of the electrons. For example, in [[electric power transmission|AC power lines]], the waves of electromagnetic energy propagate through the space between the wires, moving from a source to a distant [[external electric load|load]], even though the electrons in the wires only move back and forth over a tiny distance.
The ratio of the speed of the electromagnetic wave to the speed of light in free space is called the [[velocity factor]], and depends on the electromagnetic properties of the conductor and the insulating materials surrounding it, and on their shape and size.
The nature of these three velocities can be illustrated by an analogy with the three similar velocities associated with gases. The low drift velocity of charge carriers is analogous to air motion; in other words, winds. The high speed of electromagnetic waves is roughly analogous to the speed of sound in a gas; while the random motion of charges is analogous to heat - the thermal velocity of randomly vibrating gas particles.
=== Electromagnetism ===
[[Image:Electromagnetism.svg|175px|thumb|According to [[Ampère's circuital law|Ampère's law]], an electric current produces a [[magnetic field]].]]
Electric current produces a [[magnetic field]]. The magnetic field can be visualized as a pattern of circular field lines surrounding the wire.
Electric current can be directly measured with a [[galvanometer]], but this method involves breaking the circuit, which is sometimes inconvenient. Current can also be measured without breaking the circuit by detecting the magnetic field associated with the current. Devices used for this include [[Hall effect]] [[sensor]]s, [[current clamp]]s, [[current transformer]]s, and [[Rogowski coil]]s.
The theory of [[Special_relativity#Relativity_and_unifying_electromagnetism|Special Relativity]] allows one to transform the magnetic field into a static electric field for an observer moving at the same speed as the charge in the diagram. The amount of current is particular to a reference frame (who is measuring the current or charge velocity).
=== Ohm's law ===
[[Ohm's law]] states that the current flowing in the metal is directly proportional to the potential difference between two ends(across) of that metal (ideal) [[resistor]] (or other [[ohmic device]]).i.,e,
:<math>V = IR \, ,</math>
where <math>I</math> is the current, measured in [[ampere]]s; <math>V</math> is the [[potential difference]], measured in [[volt]]s; and <math>R</math> is the [[electrical resistance|resistance]], measured in [[Ohm (unit)|ohm]]s.
==Conventions==
=== Current ===<!-- This section is linked from [[Hall effect]] -->
[[Image:Current notation.svg|left|230px|thumb|A diagram showing negative charges (electrons) flowing in the opposite direction of the conventional electric current.]]
[[File:Battery symbol2.svg|thumb|right|100px|The [[electronic symbol|symbol]] for a battery in a [[circuit diagram]].]]
A flow of positive charge gives the same ''electric'' current as a flow of negative charges in the opposite direction. ''conventional current'' is positive in the direction of positive moving charges, and negative in the direction of negative moving charges.
In solid metals such as wires, the positive charge carriers are immobile, and only the negatively charged [[electron]]s flow. Because the electron carries negative charge, the ''electron'' motion in a metal is in the direction opposite to that of conventional (or ''electric'') current.
=== Reference direction ===
When solving electrical circuits, the actual direction of current through a specific circuit element is usually unknown. Consequently, each circuit element is assigned a current variable with an arbitrarily chosen ''reference direction''. When the circuit is solved, the circuit element currents may have positive or negative values. A negative value means that the actual direction of current through that circuit element is opposite that of the chosen reference direction.
In electronic circuits it is usually assumed that all currents flow to ground. This usually matches conventional current direction, because power rail is positive in most cases.
== Occurrences ==
Natural examples include [[lightning]] and the [[solar wind]], the source of the [[polar aurora]]s (the [[aurora borealis]] and [[aurora australis]]). The artificial form of electric current is the flow of [[electrical conduction|conduction]] [[electron]]s in metal [[wire]]s, such as the overhead power lines that deliver [[electric power transmission|electrical energy]] across long distances and the smaller wires within electrical and electronic equipment. In [[electronics]], other forms of electric current include the flow of electrons through [[resistor]]s or through the vacuum in a [[vacuum tube]], the flow of [[ion]]s inside a [[Battery (electricity)|battery]] or a [[neuron]], and the flow of [[Electron hole|holes]] within a [[semiconductor]].
== Electrical safety ==
The most obvious hazard is [[electrical shock]]. The amount of current passing through the body, as well as the nature of the contact, the condition of the body part, the current path through the body and the voltage of the source determines the effect. While a very small amount can cause a slight tingle, large amounts can cause severe [[Burn (injury)|burns]] if it passes through the skin or even [[cardiac arrest]] if enough passes through the heart. The [[electric shock#Shock effects|effect]] also varies considerably from individual to individual. {{Citation needed|date = March 2009}}
Accidental electric heating can also be dangerous. An overloaded [[power cable]] is a frequent cause of fire. A battery as small as an [[AA cell]] placed in a pocket with metal coins can lead to a short circuit heating the battery and the coins which may inflict burns. [[Nickel-cadmium battery|NiCad]], [[Nickel metal hydride battery|NiMh cells]], and [[Lithium battery|lithium batteries]] are particularly risky because they can deliver a very high current due to their low [[internal resistance]].
== იხილეთ ადრეთვე ==
| 